Playing Discs; Watching A Dvd Disc - Pioneer XR-A9700DV Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Playing Discs

DISC CHANGE
DISC-1,2,3
OPEN/CLOSE
¡ · ¢
2 3
7
4 · 1
Changing discs
The disc tray has space for up to
three discs. To switch discs use the
or
buttons.
DISC CHANGE
DISC
Press
to stop the
DISC CHANGE
current disc (if it's playing) and
start the next disc playing.
To select a disc directly and start
it playing, use the three
buttons.
When the disc tray is open, press
to rotate the disc tray
DISC CHANGE
for access to all three discs.
To load/change discs during
playback, press
/
OPEN
access the two discs not currently
playing.
Here, we'll run through the basics you need to play DVD, CD and Video CD discs,
including the playback controls. Other functions, including those for watching
multilingual discs, are covered later—see pages 30 to 33.

Watching a DVD disc

1
With the system switched on, press OPEN/CLOSE.
The disc tray ejects. Place a DVD disc with the label face up, into disc 1's disc
guide in the disc tray. Make sure that it's seated properly.
Press 26 .
2
Alternatively, press 2 3 on the front panel.
The disc tray closes and the disc starts playing from title 1, chapter 1.
Use the VOLUME 5 and ∞ buttons to adjust
3
the volume (or the front panel volume control).
On the remote, press and hold for continuous adjustment. The display
indicates the current volume as you adjust it.
VOLUME
To freeze the frame, press 26 .
4
Alternatively, press 2 3 on the front panel.
To resume playback, press 26 or 2 3 again.
5
To scan backward or forward, press and hold
1 or ¡ .
On the front panel, these buttons are marked 4·1 and ¡·¢ .
Release the button to resume normal playback. (If the disc continues in scan
mode, press 26 (remote) or 2 3 (front panel) to resume playback.)
Note: with DVD, fast-forward playback appears much smoother than fast-
reverse playback. This is due to the way the picture is recorded on the disc.
6
To skip back or forward to another chapter,
press 4 or ¢.
On the front panel, these buttons are marked 4·1 and ¡·¢ .
Pressing ¢ once skips to the start of the next chapter on the disc. Further
presses take you to subsequent chapters.
DISC
Pressing 4 once takes you to the beginning of the current chapter. Further
presses skip to the start of previous chapters.
To stop playback, press 7 .
7
Notice that the display shows
again, playback will start from the point it was last stopped.
to
CLOSE
If you press 7 twice to stop playback, the disc will start again from the
beginning when 26 is next pressed.
4 Getting Started
. This means that if you press 26
RESUME
23
En

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Xr-vs100dS-a9700vS-vs100v

Table des Matières