Cembre NR-11P Notice D'utilisation Et Entretien page 15

– Support trolley type CS-SD and CS-SD-E
NOTE: Fit the 10 cm socket
extension when using the
wrench on support trolley.
Contact Cembre for further
information.
– Interface Kit "KHOR-NR"
code 2874003
Enables the wrench to be mounted in
horizontal position on support trolley.
– 190 ml oil code 6002966
For complete gearbox/reduction oil change.
(at least every 4 years)
15
– Interface Kit "KCS-NR" code 2874001
Enables the wrench to be mounted in vertical position on
support trolley.
Check that the trolley is fi tted
with a gas spring calibrated
at 1500 N rather than 1900 N.
ENGLISH