Cleaning The Lower Spray Arm - ARTHUR MARTIN ASA22100SX Notice D'utilisation

18
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
CAUTION! An incorrect
position of the filters can cause
bad washing results and
damage to the appliance.

Cleaning the lower spray arm

We recommend to clean the lower spray
arm regularly to prevent soil from clogging
the holes.
Clogged holes can cause unsatisfactory
washing results.
1. To remove the lower spray arm, pull it
upwards.
2. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
3. To install the spray arm back, press it
downwards.
Cleaning the upper spray arms
We recommend to clean the upper spray
arms regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The upper spray arms are placed under
the upper basket. The spray arms (B) are
installed in the duct (A) with the mounting
elements (C).
A
B
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
C