Features - Ryobi JM82 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Fence Angle Adjustments ....................................... 0-135°
Depth of Cut ........................................................0-9/16 in.
Cord Length ...............................................................10 ft.
Blade ........................................................................... 4 in.
KNOW YOUR BISCUIT JOINER
See Figure 1, page 17.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE FENCE
The biscuit joiner has an adjustable fence for setting the angle
from 0° to 135°, with positive stop settings in increments of
45°. The height of the fence can be set between 0 in. - 2 in.
The adjustable fence should always be used to guide and
balance the biscuit joiner, providing ease of operation and
maintaining control.
ANGLE SETTING SCALE
The adjustable fence on the biscuit joiner can be set at
angles from 0° to 135°.
BISCUITS
Biscuits swell rapidly upon contact with water-based wood-
working glues. They are available in three standard sizes:
#0 (5/8 in. x 1-13/16 in.)
#10 (13/16 in. x 2-1/16 in.)
#20 (15/16 in. x 2-5/16 in.)
This biscuit joiner is packaged with 20 #10 biscuits.
CARBIDE-TIPPED BLADE
The biscuit joiner has an 8-tooth carbide-tipped blade for
cutting biscuit slots.
DEPTH ADJUSTMENT KNOB
A spring-loaded depth adjustment knob makes it possible
to make proper settings for three standard size biscuits.

FEATURES

No Load Speed ............................................... 10,000/min.
Input ...............................120 V, 60 Hz, AC only, 6.0 Amps
Net Weight .............................................................. 8.4 lbs.
DUAL GRIP HANDLE
The dual grip handle offers a choice of two grip positions
for operator comfort.
DUST COLLECTION
Wood particles are drawn up through a tunnel in the base
and collect in the dust bag during cutting operations. The
dust bag can be removed and a 1-1/4 in. vacuum can be
attached to the dust port.
HEIGHT ADJUSTMENT KNOB
The height adjustment knob moves the adjustable fence up
or down to adjust the height of the fence from the center
of the blade.
HEIGHT SETTING SCALE
A scale on each side of the fence indicates the height of the
fence from the center of the blade.
LINE OF CUT INDICATOR
Centerline and cut indicator marks help the operator make
more accurate cuts.
LOCKING KNOB
The locking knob loosens the adjustable fence and allows
movement of the height adjustment knob.
NON-SKID SURFACE
The fence on the biscuit joiner has a non-skid surface to
help prevent misalignment caused by skidding during use. It
also prevents marring of the workpiece when making cuts.
SWITCH TRIGGER
The biscuit joiner has a conveniently located ON/OFF switch
trigger on the underside of the dual grip handle.
6 − English