Features; Assembly; Operation - Ryobi TVM01 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Quick-Change Collet ...................................................................................................................................... 1/8 in. Universal
Rated Speed .....................................................................................................................................5,000-35,000/min (RPM)
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Hearing protection may also
be required depending on the type of attachment used
and as prescribed elsewhere in this Operator's Manual.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.

FEATURES

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.

OPERATION

NOTICE:
To prevent damage to the spindle or spindle lock, always
allow motor to come to a complete stop before engaging
the spindle lock.
APPLICATIONS
You may use this product for the purposes listed below:
 Carving, engraving, etching, polishing, cleaning, removing
rust, sanding, cutting, grinding, sharpening, drilling, and
routing
USING THE TOOL HANGER
See Figure 1, page 14.
WARNING:
Do not use the tool hanger to hang the tool from your
body. Do not suspend the tool overhead. Suspend only
from stable and secure locations.
 Turn the tool off and remove accessories.
 Swing the tool hanger out and hang the tool on a suitable,
stable structure.
8 - English