Technical Data - DeguDent Neacid-Beizgerät Mode D'emploi

2 Technical data

Voltage:
(special version 100/120 V~, 50/60 Hz)
Power consumption:
double insulation
Housing, bath container, cover and sieve are made of acid-resistant and shock-proof polypropylene.
Dimensions:
Weight:
REF
3 Information on Neacid
Neacid is a pickling agent in powder form. When it is dissolved in water a highly efficient acid bath is
formed to remove oxides and fluxes from cast and soldered objects pro duced from precious metal
alloys.
It is also suitable for 14 and 18 carat colored and white gold as well as for silver alloys. For Palliag
silver alloys a pickling time of 5min must not be exceeded. These alloys will not become entirely
bright; copper oxides, however, will be dissolved without any residues. During extended pickling these
alloys will be attacked and obtain a darker color. For 8 carat decorative gold the risk of stress corrosion
cracking exists so that Neacid can only be recommended for stress-free casting.
Attention during the handling of Neacid !
Eyes, mucous membranes and open wounds must neither get in contact with Neacid solution nor with
Neacid powder.
Causes serious eye irritation.
Causes skin irritation.
Harmful to aquatic life with long lasting effects.
Avoid release to the environment.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
IF ON SKIN: Wash with plenty of water/soap.
8
200/240 V~, 50/60 Hz
40/60 W at 100/120 V~
40/60 W at 200/240 V~
L 180 x W 170 x H 190 mm
650 g
53 5431 0001 (200/240 V)
53 5431 0017 (100/120 V)
® and