Technical Specifications; Investment Storage; Product Code - DeguDent Deguvest California Mode D'emploi

2 Technical specifications

Mixing ratio powder : distilled water
Total expansion (in % linear)
Working time (min . at 20 °C)
3 Important notes
To preserve the high quality of Deguvest California, please reseal the bag after removing the required
amount of powder .
It is recommended to fill the contents of the bag into an air tight container to protect the investment
compound from humidity .
Avoid bringing Deguvest California into contact with phosphate-bonded investment compounds; this
causes damage . Please use a separate mixing bowl and spatula .

3.1 Investment storage

Most of you are probably aware of the problems which can occur when investment is subjected to
variations in environment temperature (e .g . summer and winter) and the effect this can have on your
castings . That is why it is very important to find the right place to store your supply of investment .
The investment should be stored in a cool and dry place, between +5 °C to +30 °C at 30 % to 90 %
relative humidity .
If you have a place in your laboratory where these conditions can be found throughout the year, then
that's the place to store your investment!
If it is not possible for you to store your investment at this temperature, then you should at least make
sure that the work bench where investing is done fits these requirements (use a temperature control
cupboard or similar) .
Please note the symbols on product labels:

4 Product code

5 Batch or lot number
6 Use before
7 Consult instructions for use
GA_Deguvest California_50571812f_1215.indd 11
100 g : 32 – 40 ml
1 .3 – 1 .6
7– 8
11
07.12.15 11:21