Condensation - Sony DVCAM DRV-1000 Mode D'emploi

Avoid touching the electrical contacts on the outside of the
cassette. Clean the contacts with a cotton swab about once
every ten eject operations.
Attach labels only in the positions shown.
Storing cassettes
After using a cassette, rewind it to the beginning of the tape,
then store it in its case, in an upright position.

Condensation

All video decks are susceptible to condensation. If moisture
condenses on the rotating drum, the tape may stick, and both
the tape and heads may be damaged.
Condensation occurs when the metal parts are colder than
moisture-laden surrounding air. If you move the drive from a
cold place to a warmer one, always allow sufficient time for
any condensation to evaporate.
If the drive detects condensation, it stops operating, and the
pause indicator flashes rapidly.
Label positions
Electrical contacts
5 EN