Operation - Sony DVCAM DRV-1000 Mode D'emploi

Operation

Once the software installation is completed, the only hardware
operations required on the drive are loading and unloading
cassettes.
Loading and unloading cassettes
Use the following procedure.
1
Press the eject button on the front panel of the drive.
The drawer slides out, and the cassette holder pops up.
Notes
• Ejection is not possible during recording. First stop the
recording, then press the eject button.
• If you have connected the EJECT jack on the rear panel
to a controlling device, you can also eject the drawer
from within the software.
Eject button
(Continued)
13 EN