Honda GP160 Manuel De L'utilisateur page 10

[Low Profile Types]
1. Push the latch tabs and open the air cleaner cover.
2. Free the hooks from the setting pins on the air cleaner case
and remove the air cleaner cover to the right side of the frame
pipe, taking care not to damage the air cleaner cover.
3. Remove the air filter from the air cleaner case.
4. Check the air filter to be sure it is clean and in good condition.
If the air filter is dirty, clean it as described on page 9.
Replace the air filter if it is damaged.
HOOK
SETTING PIN
AIR FILTER
AIR CLEANER COVER
10
AIR CLEANER COVER
LATCH TAB
5. Reinstall the air filter in the air cleaner case.
6. Set the hooks of the air cleaner cover to the setting pins
securely, then push the air cleaner cover to lock the latch tabs.
Be sure that the cover is set securely. There must be no
clearance between the air cleaner cover and case.
Operating the engine without an air filter, or with a damaged
air filter, will allow dirt to enter the engine, causing rapid
engine wear. This type of damage is not covered by the war-
ranty.
GOOD
HOOK
SETTING PIN
AIR CLEANER COVER
ENGLISH
NO GOOD
AIR CLEANER CASE
AIR FILTER
LATCH TAB