Honda GX200 Manuel De L'utilisateur

3RZ1C8000.fm Page 1 Friday, April 13, 2018 9:19 AM
INTRODUCTION
Thank you for purchasing a Honda engine. We want to help you to
get the best results from your new engine and to operate it safely.
This manual contains information on how to do that; please read it
carefully before operating the engine. If a problem should arise, or
if you have any questions about your engine, consult your servicing
dealer.
All information in this publication is based on the latest product
information available at the time of printing. Honda Motor Co., Ltd.
reserves the right to make changes at any time without notice and
without incurring any obligation. No part of this publication may be
reproduced without written permission.
This manual should be considered a permanent part of the engine
and should remain with the engine if resold.
We suggest you read the warranty policy to fully understand its
coverage and your responsibilities of ownership.
Review the instructions provided with the equipment powered by
this engine for any additional information regarding engine startup,
shutdown, operation, adjustments or any special maintenance
instructions.
SAFETY MESSAGES
Your safety and the safety of others are very important. We have
provided important safety messages in this manual and on the
engine. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt
you or others. Each safety message is preceded by a safety alert
symbol and one of three words, DANGER, WARNING, or
CAUTION.
These signal words mean:
You WILL be KILLED or SERIOUSLY
HURT if you don't follow instructions.
You CAN be KILLED or SERIOUSLY
HURT if you don't follow instructions.
You CAN be HURT if you don't follow
instructions.
Each message tells you what the hazard is, what can happen, and
what you can do to avoid or reduce injury.
DAMAGE PREVENTION MESSAGES
You will also see other important messages that are preceded by
the word NOTICE.
This word means:
Your engine or other property can be damaged if you
don't follow instructions.
The purpose of these messages is to help prevent damage to your
engine, other property, or the environment.
© 2018 Honda Motor Co., Ltd. -All Rights Reserved
3RZ1C800
00X3R-Z1C-8000
MANUEL DE L'UTILISATEUR
BEDIENUNGSANLEITUNG
MANUAL DEL PROPIETARIO
INSTRUKTIEHANDLEIDING
MANUALE DELL'UTENTE
The illustrations herein are mainly based on: PTO shaft type Q.
• The illustration may vary according to the type.
CONTENTS
INTRODUCTION.................. 1
SAFETY MESSAGES............ 1
SAFETY INFORMATION ....... 2
SAFETY LABEL LOCATION... 2
COMPONENT & CONTROL
LOCATIONS ....................... 2
FEATURES ......................... 2
SETTING ............................ 3
BEFORE OPERATION
CHECKS ............................ 3
OPERATION ....................... 4
SAFE OPERATING
PRECAUTIONS................. 4
STARTING THE ENGINE .... 4
STOPPING THE ENGINE .... 5
SETTING ENGINE SPEED ... 5
SERVICING YOUR ENGINE ... 6
THE IMPORTANCE OF
MAINTENANCE................ 6
MAINTENANCE SAFETY ... 6
SAFETY PRECAUTIONS .... 6
MAINTENANCE
SCHEDULE ...................... 6
REFUELING...................... 6
ENGINE OIL ..................... 7
Recommended Oil.......... 7
GX200T2 • GX390T2
Oil Level Check ............. 7
Oil Change.................... 7
ENGLISH
OWNER'S MANUAL
GX200 • GX390
LPG-Fueled Engine
AIR CLEANER.................. 8
Inspection .................... 8
Cleaning ...................... 8
SPARK PLUG .................. 9
IDLE SPEED .................... 9
HELPFUL TIPS &
SUGGESTIONS................. 10
STORING YOUR ENGINE ... 10
TRANSPORTING ............ 10
TAKING CARE OF
UNEXPECTED PROBLEMS ... 10
TECHNICAL INFORMATION... 11
Serial Number Location... 11
Remote Control Linkage... 11
High Altitude Operation... 11
Specifications................ 11
Tuneup Specifications .... 11
Wiring Diagrams ............ 12
CONSUMER INFORMATION ...12
DISTRIBUTOR/DEALER
LOCATOR INFORMATION... 12
CUSTOMER SERVICE
INFORMATION .............. 12
1