Features; Assembly - Ryobi P2903 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Motor ......................................................................18 V DC
Auger Bit / Hole Diameter ............................ 6 in. (150 mm)
KNOW YOUR HOLE AUGER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ANTI-KICKBACK MECHANISM
The anti-kickback feature is designed to protect the user
from injury. When the tool detects tough soil or debris, the
kickback feature will activate to aid in protecting the user.
This feature will automatically stop the tool.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Handle Assembly
6" Auger Bit
Locking Pin with Pin Clip
Operator's Manual

FEATURES

Maximum Hole Depth................................. 31 in. (800 mm)
Speed ................................................................... 115 RPM
BRUSHLESS MOTOR
This product features a brushless motor that maximizes
power and performance as well as battery run time.
DIRECTION OF ROTATION SELECTOR
The direction of the auger rotation is reversible and can be
operated in forward or reverse with kickback protection
enabled; or in forward with kickback protection off.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ASSEMBLING THE HOLE AUGER
See Figures 2 - 3.
 Stand the auger bit upright with tip pointing down.
 Remove the locking pin from the auger.
 Install the drive shaft into the auger.
 Align the holes on the auger and drive shaft.
 Insert the locking pin and secure with the pin clip.
7 — English