Operation - Marsh 4BT Manuel D'utilisation

Operation

Cutting the Tape
Figure D
Figura D
Selecting the Water
Level
25005/97231 Rev D
1. Be sure the machine is plugged in and the main switch is turned on.
2. Press one of the touch buttons on the top of the machine. The lengths available to
cut are indicated by the numbers, inches or metrics that are adjacent to the buttons.
Always remove the cut piece of tape before making another cut.
Touch Button
Touche de commande
Botón pulsador
The correct water level setting depends upon the weight of the tape, the speed of the
operation, and the environment. When using a heavy tape such as a 90 lb or reinforced
tape, or when working in a dry environment, select a high water level. If you are using a
lighter tape, such as a 35 lb tape, or using slow operation, a low water level is necessary.
For 60 lb or moderate weight tape, use a mid-level water selection.
11