Green Cell 1KVAS-EBP Mode D'emploi page 17

PARAMETERS INQUIRING
Press and hold the scroll key
The inquired items include input, battery, output, load, temperature. Press and hold the scroll key
seconds, LCD begins to display the items circularly and orderly which transfer to another every 2 seconds. Press and
hold the key for some time again, it will return to output status.
Item
Output
Load
Temperature
Input
Battery
or for more than half a second (less than 2 seconds) to inquire about items.
Table 5: Parameters inquiring
Description
Display the output voltage and output frequency
of the UPS. As the following graphic shown, the
output voltage is 230v & the output frequency
is 50Hz.
Display the numerical value of the active power
(WATT) and apparent power (VA) of the load.
For example, as the following graphics shown:
the WATT of the load is 100w, VA is 100VA
(when disconnect load, it is a normal phenome-
non to show a small numerical value of WATT
and VA).
Display the temperature of the inverter in the
UPS. As the following graphics shown: the
temperature of the inverter is 37°C.
Display the voltage and frequency of the input.
As the following graphics shown: the input
voltage is 210v, input frequency is 49.8Hz.
Display the voltage and capacity of the battery.
As the following graphics shown: the battery
voltage is 38v, the capacity of battery is 100
(the capacity of battery is approximately recko-
ned according to the battery voltage).
for more than 2
Graphic
EN / 17