DuPont Tychem TK Manuel D'utilisation page 11

5. When snapped into position the retaining collar should appear
as shown in Fig. 11
Fig. 11
6. Pull the boot sealing collar up so that the retaining collar is
trapped in position as shown in Fig. 12.
Fig. 13
7. Turn the PVC protective strip up over the stainless steel band
as shown in Fig. 13.
8. Pull the leg of the garment through. The final assembly of the
boot into the detachable boot system should appear as
shown in Fig.14.
Parts required:
Rubber 'O' ring - Part number D00693
Retaining collar - Part number B01603
10
Fig. 12
Fig. 14