Installing The Unit - Sony VPL-HW45 Guide De Référence Rapide

Masquer les pouces Voir aussi pour VPL-HW45:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Step 2
1
Position the unit so that the lens is
parallel to the screen.
2
After connecting the AC power cord to
the unit, plug the AC power cord into
a wall outlet.
Top of the unit
Lights in red.
Note
After connecting the AC power cord to the unit,
the ON/STANDBY indicator may blink in
orange.
You may not be able to control the unit while
the indicator is blinking, but this is not a
malfunction. Wait until it stops blinking and
remains lit in red.
3
Press the ?/1 (ON/STANDBY) button
to turn on the unit.
Top of the unit
Flashes in green for a
while (tens of seconds)
and then lights in green.
4
Press the PATTERN button to display
a test signal for performing
adjustments.

Installing the Unit

a Move both lens shift dials to
adjust the picture position.
To adjust the vertical
position
To adjust the horizontal
position
b Adjust the picture size using the
zoom lever.
Zoom lever
13
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vpl-hw45esVpl-hw45ewVpl-hw65Vpl-hw65esVpl-hw65ew

Table des Matières