What If There Are Problems - Beurer GS 485 Mode D'emploi

13. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display
" "
or incorrect weight
is displayed.
or incorrect weight
is displayed..
Incorrect weight is dis-
played.
no Bluetooth connec-
®
tion ( symbol is miss-
ing).
Cause
Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
The maximum load-bearing
capacity of 180 kg was excee-
ded.
No flat, stable surface.
Not standing still.
Scale zero setting is incorrect.
Device outside the range.
Scale is not switched on
User memory space is full. No
more measurements can be
saved.
The battery in the scale is empty. Replace the battery in the scale.
remedy
Assign unknown measurement in app or
repeat user assignment.
The load must not exceed 180 kg
Place the scale on a flat, stable surface.
Attach the additional feet for carpet.
Stand as still as possible.
Wait until the scale switches itself off. Acti-
vate scale, wait for "0.0 kg" to appear and
repeat measurement.
The range in the open is approx. 10-25 m.
Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WiFi routers,
microwaves, induction hobs etc.
Switching on the scale.
Open the app and switch the scale on. The
data is transferred automatically. This may
take up to one minute.
15