What If There Are Problems - Beurer PS 41 Mode D'emploi

9. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display
0Ld
Lo
Err
No measurement possible
Possible errors
If you stand on the scale to measure your
values before the display shows "
scale will not function correctly.
The batteries in the scale are empty.
Incorrect weight measurement
Possible errors
Scale is on carpeting.
Incorrect zero point of scale.
All manuals and user guides at all-guides.com
Cause
The maximum load capacity of
180 kg was exceeded.
The batteries are almost empty.
0. 0
Weighing before "
0. 0
kg", the
Remedy
Do not load the unit with over 180 kg.
Replace the batteries.
Switch on scale again and wait for
kg".
0. 0
" kg".
Remedy
Correctly activate the scale (wait for "
displayed) and repeat the measurement.
Replace the batteries.
Remedy
Place the scale on a level and solid surface.
Place a scale on a secure, fl at surface. Switch on the
scale and wait until the scale automatically switches
off again (do not step onto the scale before then).
Then switch on the scale again and repeat the meas-
urement.
11
0. 0
kg" to be