What If There Are Problems - Beurer BF 530 Mode D'emploi

Observe the local regulations for material disposal.
Please dispose of the unit in accordance with EC Directive WEEE (Waste Electrical and Electronic
Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

13. What if there are problems?

If the scale encounters an error during measurement, the following is displayed:
Display
Only the weight is dis-
played – no diagnostic
values are shown.
or incorrect weight
is displayed.
or incorrect weight
is displayed.
Incorrect weight is dis-
played.
Cause
Unknown measurement (the
measurement is beyond the limit
of the user assignment and/or it is
not possible to assign to a unique
user – see chapter 10 "User
assignment").
The proportion of fat is outside
the measurable range (less than
3% or greater than 65%).
Maximum weight capacity of
180 kg exceeded.
No flat, stable surface.
Not standing still.
Incorrect zero point of scale.
The batteries in the scale are
empty.
Solution
Repeat user assignment. See chapter 7
"Entering user data".
Please repeat the measurement barefoot,
or with the soles of the feet lightly damp-
ened if necessary.
Loads must be limited to 180 kg.
Place the scale on a flat, stable surface.
Stand as still as possible.
Wait until the scale switches itself off.
Activate scale, wait for "
and repeat measurement.
Replace the batteries in the scale.
19
kg" to appear