Publicité
Les langues disponibles
Les langues disponibles
D) MAINTENANCE AND STORAGE
1) Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition.
2) Never store the equipment with petrol in the tank inside a building where fumes may
reach an open flame or spark.
3) Allow the engine to cool before storing in any enclosure.
4) To reduce fire hazards, keep the engine, silencer, battery compartment and petrol
storage area free of grass, leaves, or excessive grease.
5) Check the grass-catcher frequently for wear or deterioration.
6) Replace worn or damaged parts for safety purposes.
7) If the fuel tank has to be drained, this should be done outdoors.
8) When the machine is to be stored or left unattended, lower the cutting deck.
1.3 SAFETY LABELS
Your machine must be used with care. Therefore, labels have been placed on the
machine to remind you pictorially of the main precautions to take during use. These
labels are to be considered an integral part of the machine. If a label should fall off or
become illegible, contact your Retailer to replace it. Their meaning is explained below.
Warning: Read the Operator's Manual before operating this machine.
Warning (in the manual start models): disconnect the spark plug
cap
and read the instructions before carrying out any maintenance or repairs.
Warning (in the electric start models): remove the key and read the
instructions before carrying out any maintenance or repairs.
Danger! Ejected objects: Keep bystanders away.
Danger! Dismemberment: Make sure that children stay clear of the
machine all the time when engine is running.
Page 115 de 160
Publicité
