Publicité
Les langues disponibles
Les langues disponibles
Powerboost Function
The Powerboost function can be used to heat large
amounts of water faster than by using heat level Š.
This function allows you to increase the maximum
power level of the element in use.
Limitation on use
This function is available on all elements, provided
that no other element in the same group is operating,
(see picture). If this is not the case, the ˜ and Š
symbols will flash on the selected element display ;
then it will automatically set the power level Š.
*URXS
*URXS
How to activate
The cooktop must be switched on.
1
Select the required element. The corresponding
indicator ligths up.
Touch the Ž symbol. The indicator ˜ lights up.
2
The function is now activated.
How to turn off
1
Select the element The corresponding indicator
lights up.
Touch the Ž symbol. The letter ˜ is no longer
2
displayed and the element will return to heat
setting Š. The function will be deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
20
Time programming function
This function may be used in two different ways:
▯
▯
Cook time
You can use the timer function to set a cook time for
any element. The element will turn off automatically
once the set time has elapsed.
9
‒
*URXS
*URXS
Setting a Cook Time
The cooktop should be turned on.
1
2
to switch an element off automatically
as a kitchen timer
CAUTION
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
‒ This function should not be used for long
periods of time, especially at high heat
settings.
‒ Make sure the cooktop is turned off with the
main power switch after each use.
Select the cooking element and heat setting
required. Then touch the M symbol. ‹‹ appears
in the visual display of the timer function. The s
indicator lights up on the selected cooking
element.
Program the time using the knob.
After a few seconds, the timer will start to count
down. The shortest cook time shows on the
display.
Publicité
