Gaggenau CI 481 612 Notice D'utilisation page 14

Setting the cooktop
This section will show you how to set the elements.
The table contains details on the heat settings for a
variety of dishes.
Adjusting the heat settings:
The cooktop must be switched on.
1 Select the desired element. To do this, move the
knob to the required element.
2 Turn the knob until the desired heat setting is
displayed.

3 To change the heat setting: Select the element
and change the heat setting with the knob.
Note: The selected heat setting will flash if no pan is
placed on the induction element. After a certain time,
the element switches off.
14

Turning off an element
Select the element and turn the knob until ‹ appears.
The element is switched off and the residual heat
indicator comes on
Note: The cooktop is automatically turned off when all
elements have been switched off for a set period of
time. If the cooktop is still hot, the residual heat
indicator will come on. If the cooktop is turned on a
few seconds after ti was turned off, the last settings
will remain. To return to the last selected settings
choose a cooking element.