Technical Information; Technical Data; Guarantee - Electrolux SB318N Notice D'utilisation

7.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
7.3 Installation of the appliance
and door reversal
7.4 Installation and replacing of
the CLEANAIR CONTROL filter
On delivery the carbon filter is in a plastic
bag to preserve performance. The filter

8. TECHNICAL INFORMATION

8.1 Technical data

Height
Width
Depth
Rising time
9.

GUARANTEE

CH
Customer Service Centres
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
1840 mm
595 mm
642 mm
20 h
Industriestrasse 10
5506 Mägenwil
should be placed in the drawer before the
appliance is turned on.
1. Open the drawer.
2. Take the filter out of the plastic bag.
3. Insert the filter in the drawer.
4. Close the drawer.
To get the best performance the carbon
air filter should be changed once every
year.
New active air filters can be purchased
from your local dealer.
The air filter is a consumable
accessory and as such is not
covered by the guarantee.
Voltage
Frequency
The technical information are situated in
the rating plate, on the external or internal
side of the appliance and in the energy
label.
Point of Service
Le Trési 6
1028 Préverenges
ENGLISH 57
230 - 240 V
50 Hz
Via Violino 11
6928 Manno