Publicité
Les langues disponibles
Les langues disponibles
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the
side where the door hinges of the appliances are
fitted. Insert the appliance until the upper strip butts
up against the unit (1) and make sure that the lower
hinge is in line with the surface of the unit (2).
Fasten the appliance with 4 screws provided in the
kit included with the appliance. (I = 3,5 x 13)
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge cover (E) into
position.
20
3
2
1
PR01
D023
I
D724
C
D
E
2
B
Publicité
