Beta Motorcycles RR 250 2T 2017 Mode D'emploi page 128

3
4
5
GB
1
2
3
7
6
KEy TO SymBOlS
Tightening torque
Threadlocker Medium
Grease
BRaKES
fRONT BRaKE
The front brake is disk type with hydraulic
control.
The home position of brake lever 2 can be
adjusted by means of screw 1.
REaR BRaKE
The home position of brake pedal 3 can
be altered by turning adjusting screw 5 af-
ter loosening the counternut located under
dust cap 4. Loosen the counternut and turn
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.
CluTCh
The adjustment screw 6 allows adjustment
of the distance of lever 7 from the knob.
The empty run is recovered automatically.
38