Publicité
Les langues disponibles
Les langues disponibles
Basic Operations
1
Turn on the power
2
Select the source
SOURCE
• CD: If a disc is not in the loading slot, you
cannot select CD as the source to play.
• CD-CH: Without connecting the CD
changer and setting the "EXT Input"
setting correctly, you cannot select CD-CH
(CD changer).
• SIRIUS: When the "EXT Input" setting is
not correctly done, you cannot select
SIRIUS Radio (see page 37).
• LINE-IN: Select the external component
(see page 45).
8
The Operation screen for last
selected source is recalled.
TUNER
CD
LINE-IN
CD-CH
(SIRIUS)
3
Adjust the volume
4
Select the DSP mode and
sound mode as you want
• For details, see pages 23 to 28.
To drop the volume in a moment (ATT):
To restore the sound,
press it again.
To turn off the power:
Hold
CAUTION on Volume Setting:
Discs produce very little noise compared
with other sources. If the volume level is
adjusted for the tuner, for example, the
speakers may be damaged by the sudden
increase in the output level. Therefore,
lower the volume before playing a disc
and adjust it as required during playback.
Publicité
