Gaggenau RY 491 Instructions D'installation page 28


Using the positioning aid, set both longitudinal sides of
the furniture door parallel.

Using a square, extend the drill hole marks which you
have just made to the vertical marks.

Apply the fixing rib and mark out the holes.

Pre-drill the holes..

Screw on the fixing ribs.

Hang the furniture door on the double threaded bolts.
28
21. Attaching the adjusting rail to
the furniture door
(freezer compartment)

Measure the distance Y between the adjusting rail and
the overhead furniture/fixtures.

Loosen the 2 nuts and remove the adjusting rail.

Mark this amount Y on the rear of the furniture door.

Determine and mark the centerline of the furniture door.

Put on the adjusting rail and align along the marks.
Mark the drill holes.

Drill the holes.

Screw on the adjusting rail tightly.