Oase Filtral UVC 400 Notice D'emploi page 12

Clean UVC clarifier
CAUTION
The quartz glass and UVC lamp could break and result in cuts.
Carry out all work on the UVC clarifier carefully to avoid cutting injuries.

Avoid vibrations, impacts and hectic movements to prevent the breaking of glass.

 For safety reasons, the UVC lamp can only be turned on when the UVC clarifier is
properly installed into the device.
• Check the quartz glass for visible damage. Replace a damaged quartz glass.
• Clean the outside of the quartz glass with a damp cloth, clean the water housing
with clear water and a brush.
• Check that the large O-ring is correctly inserted in the water housing. This ensures
that the water housing is watertight.
• When installing, turn the device head clockwise until the marking points to the
locked lock.
12
FTL0032