DeWalt XR DCF809L2T Traduction De La Notice D'instructions Originale page 26

EnGLIsh
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF809
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the
maximum capacity of the tool. However if the tool is used
for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
24
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Brushless Cordless Compact Impact Driver
DCF809
DCF809
V 18
D
DC
1/2
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015+A11:2022, EN62841-2-
Li-Ion
2:2014+AC:2015.
min 0–2800
-1
These products also comply with Directive 2014/30/EU and
min -1 0–3200
2011/65/EU. For more information, please contact D
Nm 190
the following address or refer to the back of the manual.
mm 6.35 hex
The undersigned is responsible for compilation of the technical
kg 0.96
file and makes this declaration on behalf of D
dB(A) 91
dB(A) 99
Markus Rompel
dB(A) 3
Vice President of Engineering, PTE-Europe
D
m/s 2 21
65510, Idstein, Germany
m/s 1.8
2
04.08.2022
D
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+AC:2015+A11:2022, EN62841-2-
2:2014+AC:2015.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Brushless Cordless Compact Impact Driver
DCF809
WALT declares that these products described under
e
WALT at
e
WALT.
e