Vortice AIRLINK 30 Livret D'instructions page 30

ENGLISH
Structure and equipment
Components common to all models
The main components of the device are:
• main body (1) already assembled which includes:
- Body with pre-assembled plug-in terminal block, frontal grille and aesthetic panel in polycarbonate (PC) tested
according to standard UNI EN ISO 11925-2:2010 and resulted in class E for reaction to fire (according to the
EN 13501-1 standard).
- Motor holder and push-button panel in ABS material.
- 5-speed reversible EC fan.
- Integrated electronic board.
- Closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the entry
of pollutants and odors from the outside.
- Washable internal filter with frame.
• Flange (2) wall mountable with pre-assembled terminal block.
• T erminal block cover with screw and cable gland (3).
• PVC pipe for installation inside walls with thickness from 260 mm (283 mm VORT MONO AIRLINK 40) to 700
mm (optional).
VORT MONO AIRLINK 30
• Storage type heat exchanger, made of ceramic material with external filter already assembled (4A)
• External ventilation grille (d.100 T 10 RB) in plastic material, externally mountable. Grid equipped with anti-insect
net (5A).
VORT MONO AIRLINK 40
• Storage type heat exchanger, made of ceramic material supplied with two expanded polyproylene (EPP)
housings and it is complete with a central gasket to prevent air infiltration (4B).
• Outer rubber grille (5B), which can be mounted externally with plugs or inserted internally through the hole in
the wall with no need for external scaffolding.
• Washable external filter with holder grids (x2) (6)
• Insect grid (7)
VORT MONO AIRLINK 30 HCS / VORT MONO AIRLINK 40 HCS
• Remote control (8).
VORT MONO AIRLINK 30
(1)
(3)
(5A)
30
(2)
(4A)
(8)
(HCS models)
VORT MONO AIRLINK 40
(1)
(2)
(5B)
(4B)
(7)
(8)
(HCS models)
(3)
(6)