Ryobi RYRM8002CAN Manuel D'utilisation page 24

AUTO STOP
PLUG
REMOVING THE CUTTING DECK
See Figures 20 - 22.
If desired, the cutting deck can be removed from the mower
to make accessing the blades easier when changing.
WARNING:
Wear heavy gloves at all times while handling the cutting
deck. Keep hands and fingers clear of pinch points.
„ Move the mower to a level surface. Make sure the joystick
is in the locked, neutral position and the blade engage
knob is down.
„ Stop the motor, remove the start key, and set the park-
ing brake.
„ Disconnect the cables that connect the cutting deck to
the mower.
„ Lower the cutting deck to its lowest position.
„ Remove the three hitch pins and washers that secure the
cutting deck in place.
„ Slide the deck out from under the mower.
„ Reverse the process to reattach the cutting deck to the
mower.
MAINTENANCE
DECK LIFT
Fig. 20
24 — English
CABLE
PIN
PIN
PIN
Fig. 21
CUTTING
DECK
Fig. 22