JVC KD-ADV8490 Manuel D'instructions page 65

Symptom
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "No File" appears on the display.
• "Reset 01" – "Reset 07" appears on the
display.
• "Reset 08" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
Remedy/Cause
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 36).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.
REFERENCES 65