Télécharger Imprimer la page

Inventum IMC6035RT Manuel D'utilisation page 38

Publicité

Les langues disponibles

Les langues disponibles

SETTING THE CLOCK
1. Touch the clock/temperature button. The clock display shows '00:00' and the value for hours flashes.
2. Touch the up/down button or the slider to adjust the hours.
Note:
The value must be between 0 and 23.
3. Touch the clock/temperature button again. The value for minutes on the clock display flashes.
4. Touch the up/down button or the slider to adjust the minutes.
Note:
The value must be between 0 and 59.
5. Touch the clock/temperature button to save the settings. The ':' in the clock display flashes.
6. Repeat the procedure to adjust the time.
SETTING THE KITCHEN TIMER
The kitchen timer can be used independently from the cooking timer.
1. Touch the timer/child-lock button. '00:00' flashes on the clock display.
2. Touch the up/down button or the slider to adjust the hours.
Note:
The value must be between 0 and 23.
3. Touch the timer/child-lock button again. The value for minutes on the clock display flashes.
4. Touch the up/down button or the slider to adjust the minutes.
Note:
The value must be between 0 and 59.
5. Touch the timer/child-lock button to save the settings. The ':' in the clock display flashes and the timer counts
down.
When the kitchen timer finishes, you will hear a sound signal 10 times and the clock display shows the current
time. The appliance does not automatically switch off and the program or function continues.
SETTING THE COOKING TIME
The cooking time can be set for the oven function, the microwave function and the combi function.
1. Touch the clock/temperature button. '00:00hr' flashes on the clock display.
2. Touch the up/down button or the slider to set the cooking time.
When the cooking time finishes, you will hear a sound signal times and the appliance goes into standby.
USING THE DELAYED-START FUNCTION
You can use the delayed-start function to make sure that your dish is ready at a preset time. The appliance will
automatically start.
Note:
Make sure that the clock is set before you use the delayed-start function. Refer to section
clock
.
38
English
Setting the

Publicité

loading