Creating A Programme; Cd Programme Memory - Sony FM Mode D'emploi

Creating a programme

— CD Programme Memory (CD changer
with programme memory function)
You can play the tracks in the order you want
by making your own programme. You can
make two programmes: Programme 1 and
Programme 2. You can select up to 12 tracks in
each programme. You can store the
programmes in memory.
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
Programme edit mode
C D 2
DISC TRACK
2
SUR EQ
PLAY MODE
"P 1" shows Programme 1 is selected.
If have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
EN
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Select the track you want.
1 Press (SOURCE) repeatedly to select
the changer.
2 Press (SHIFT), then press the number
button to select the disc.
3 Press (SHIFT).
4 Press either side of (SEEK/AMS) to
select the track.
3
Press (5) (ENTER) momentarily.
P 1
+ENTER+
SUR EQ
PLAY MODE
µ
C D 2
DISC TRACK
3
SUR EQ
PLAY MODE
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
20
Actual total number:
3 P1.‚1
ENTER
ENTER
2 P1.‚2
Notes
• "*Wait*" appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• "*Mem Full*" appears in the display when you try to
enter more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired programme appears.
z PGM 1
Programme Play starts.
To go back to the normal playback mode,
select "PGM OFF" in step 3 above.
Notes
• If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
• "NO Data" appears in the display if no track is stored in
the programme.
• If a track stored into the programme memory is not
contained in the disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information has not been loaded yet, "Not
Ready" appears.
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC TRACK
4
SUR EQ
PLAY MODE
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
E
Sony CDX-C810DSP (
z PGM 2 z PGM 1+2
PGM OFF Z
7 P1.‚8
ENTER
,F,G,I) 3-856-118-11(2)