Sony FM Mode D'emploi page 21

Masquer les pouces Voir aussi pour FM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2
Press (1) (N) repeatedly until "DEL"
appears.
D E L
--PGM1--
SUR EQ
PLAY MODE
ENTER
To erase Programme 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
P 1
NO Data
SUR EQ
PLAY MODE
ENTER
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
Adding tracks to the programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC
TRACK
4
7 P1.‚8
SUR EQ
PLAY MODE
ENTER
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
Track slot number
C D 2
DISC
TRACK
3
2 P1.‚5
SUR EQ
PLAY MODE
ENTER
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
Actual total number:
Erasing the tracks in the
programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D 2
DISC
TRACK
3
SUR EQ
PLAY MODE
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
C D 2
DISC
TRACK
3
SUR EQ
PLAY MODE
The track currently registered in slot 6 of
Programme 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC
TRACK
- -- P1.‚6
SUR EQ
PLAY MODE
µ
C D 2
DISC
TRACK
4
SUR EQ
PLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
E
Sony CDX-C810DSP (
2 P1.‚7
ENTER
Track slot number
3 P1.‚6
ENTER
ENTER
7 P1.‚6
ENTER
,F,G,I) 3-856-118-11(2)
EN
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

MwLwLw sw

Table des Matières