Creating Your Own Programme (Programme Play) - Sony CDP-CA9ES Mode D'emploi

Creating Your Own
Programme (Programme Play)
You can arrange the order of the tracks on the discs
and create your own programme. The programme can
contain up to 32 tracks.
DISC 1 – 5
Number buttons >10
RM-D645 for CDP-CA9ES
PROGRAM
>20
CHECK
(
RM-D515 for CDP-CA8ES
PROGRAM
>20
CHECK
(
1
Press PROGRAM.
"PROGRAM" appears in the display.
If a programme is already stored, the last step of
the programme appears in the display. When you
want to erase the whole programme, hold down
CLEAR on the remote until "ALL CLEAR"
appears in the display (see page 12).
( p
PROGRAM
DISC 1 – 5
Number
buttons
CLEAR
p
DISC 1 – 5
Number
buttons
CLEAR
p
2
Press DISC 1 – 5 to select the disc.
1 2 3 4
PROGRAM
DISC TRACK MIN
"AL" in the display stands for "all" tracks.
When you want to programme the whole disc as
one step, skip Step 3 and go to Step 4.
3
Press the number buttons of the tracks you want to
programme in the order you want.
To programme the track numbered over 10 (or 20
when using the remote), use the >10 button (or >20
on the remote) (see page 9).
Last programmed track
Playing order
1 2 3 4
PROGRAM
DISC TRACK STEP
After one second
1 2 3 4
PROGRAM
DISC TRACK MIN
Total playing time
If you've made a mistake
Press CLEAR on the remote, then press the correct
number button.
4
To programme other discs or tracks, do the
following:
To programme
Other discs
Other tracks on the same disc
Other tracks on other discs
5
Press ( to start Programme Play.
To cancel Programme Play
Press CONTINUE.
Playing CDs
5 1 2 3 4 5
A
6 7 8 9 10
SEC
2 5
5
A
8
Programmed
tracks
5 2 5
A
8
SEC
Repeat Step(s)
2
3
2 and 3
EN
11