Creating Your Own Programme (Programme Play) - Sony SCD-777ES Mode D'emploi

Creating Your Own
Programme
(Programme Play)
You can pick out the tracks that you like and specify the
playback or der in a pr ogramme containing up to 99 tracks
(or 999 min. 59 sec. in total pr
CONTINUE
Number
buttons
>10
H
1
Press PROGRAM in stop mode.
"PROGRAM" appears in the display
2
Press the number buttons to enter the track
number.
If you entered the wrong track number
Press CLEAR to erase the track number and r
cor rect track number using the number buttons.
To select a track number over 11
Press >10 (page 15).
3
Repeat step 2 to enter other tracks.
Each time you enter a track number
programme time appears in the display
4
Press H.
Programme Play star ts.
To resume normal play
Press CONTINUE.
z
The programme remains even after Programme Play ends
Press H to play from the beginning of the programme again. The
programme remains even if you stop play.
Notes
• When tracks which are not numerically consecutive on the disc
are programmed consecutively (i.e. 1, 3, 5, etc.), the actual
playing time may become longer than the total playing time
appeared in the display.
• If you turn off the player, disconnect the mains lead, or press A,
the programme will be erased.
18
GB
Z
ogramme time)
PROGRAM
CHECK
CLEAR
.
eenter the
, the total
.
Checking the contents of the programme
Before you start playing or while the player is playing,
press CHECK.
Each time you pr ess the button, in pr
track number and the total pr
display . When you pr ess CHECK while the player is
playing, the track number appears fr
numbers of the cur rent playing track number
Changing the contents of the programme
You can change the contents of the pr
mode.
Do the following:
To
1 Press CHECK repeatedly until the track
Erase a track
number you want to erase appears.
2 Press CLEAR.
Erase from the last Press CLEAR.
track in the Each time you press the button, the last
programme track of the programme is erased.
Add a track to the Press l/L to select the track you want
end in the to add, then press PROGRAM. When using
programme the remote, press the number button of the
track to be added.
Erase all tracks Press CLEAR repeatedly until "All Clear"
appears.
ogrammed or der, the
ogramme time appear in the
om the next track
.
ogramme in stop