Publicité
Les langues disponibles
Les langues disponibles
MAiNTENANcE
wARNiNg:
When servicing use only identical RIDGID
replacement parts. Use of any other parts may
create a hazard or cause product damage.
wARNiNg:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 along with
hearing protection and where necessary a full
face shield. Failure to do so could result in serious
personal injury. If operation is dusty, also wear a
dust mask.
NOTE: FigURES (iLLUSTRATiONS) START ON PAgE 12
AFTER FRENcH ANd SPANiSH LANgUAgE SEcTiONS
gENERAL MAiNTENANcE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
wARNiNg:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Electric tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the
fiberglass chips and grindings are highly abrasive to
bearings, brushes, commutators, etc. Consequently, we do
not recommend using this tool for extended work on these
types of materials. However, if you do work with any of these
materials, it is extremely important to clean the tool using
compressed air.
LUbRicATiON
All of the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under
normal operating conditions. Therefore, no further lubrication
is required.
10 - English
Publicité
