Publicité
Les langues disponibles
Les langues disponibles
Using a USB device
Installation of the USB Type-C extension cable is
required before use.
1
Connect the USB Type-C extension cable
to the USB port.
2
Tighten the screw firmly on the USB cable
holder to secure the USB Type-C
extension cable .
3
Connect the installed USB Type-C extension
cable to a USB device.
4
Press HOME, then touch [USB].
14
EN
Installation
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
Example
to dashboard/center console
Bracket
Existing parts supplied
with your car
When mounting this unit to the preinstalled
brackets of your car, use the mounting screws in
the appropriate screw holes based on your car:
T for TOYOTA and N for NISSAN.
Note
To prevent malfunction, install only with the mounting
screws .
Fuse replacement
When replacing the fuse, be sure to
use one matching the amperage
rating stated on the original fuse.
If the fuse blows, check the power
connection and replace the fuse.
If the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.
Bracket
Fuse (10 A)
Publicité
