DeWalt DC390 Guide D'utilisation page 3

DC390 18.0 Volt Cordless Circular Saw
K
A. SWITCH LOCK-OFF BUTTON
B. TRIGGER SWITCH
C. BATTERY PACK
D. DEPTH ADJUSTMENT KNOB
E. SHOE
F. LOWER GUARD
RETRACTING LEVER
G. LOWER GUARD
H. BLADE CLAMPING SCREW
I. KERF INDICATOR
J. BEVEL ADJUSTMENT KNOB
(not shown)
K. BLADE LOCK BUTTON
(not shown)
L. AUXlLARY HANDLE
3700 RPM IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules - For All Battery
Operated Tools
_ WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating
a power tool Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Do not abuse the cord. Never use the cord to carry the tool
Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords may cre-
ate a fire.
• A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified charg-
er for the battery. A charger that may be suitable for one type of
battery may create a risk of fire when used with another batter_
• Use battery operated tool only with the specifically designed
battery pack. Use of any other batteries may create a risk of fire.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense
when operating a power tool Do not use tool while tired or
under the influence of drugs, alcohol, or medication. A