Ribimex RIBILAND PREHLS7SRN Manuel D'instructions Et D'utilisation page 36

Assembly of the Protective Cover and Support Plate
Assemble the protective left cover
(5) to the left bent tube of the frame,
with two M8x16 Hexagon socket head
screws (9) and two flat washers (10).
Assemble the protective right cover (7) to the right bent tube of the frame, with three M8x16
Hexagon socket head screws (9) and three flat washers (10).
Link the left (5) and right (7)
protective covers on their top with the
connection plate (6) and fix with the
provided bolts (11) and nuts (12).
Page 36 / 69