Publicité
Les langues disponibles
Les langues disponibles
1.0.3 Caution
•
When you use the robot to vacuum ine sand,
lime, cement dust and similar substances, the
pores of the ilters become clogged. As a
result, error code E6 may appear on the
display (see chapter 'Error codes').
•
Never use the robot without the ilters.
This could damage the motor and shorten
the robot's life.
•
Only use the mains cord, the adapter and the
base station supplied to charge the robot.
•
Do not cover the infrared signal generator
and infrared signal emitter of the base station
with stickers or by placing something in front
of them. If you do, the robot and the base
station cannot communicate with each other.
•
Do not cover the camera or the sensors
on the robot, as this prevents it from
inding its way and from communicating
with the base station.
•
Always switch off the robot by setting the
on/off switch on the bottom to OFF before
you transport or store it.
•
Remove the rechargeable battery from
the robot if you are not going to use it for
some time.
•
Do not operate the robot in a dark room,
as it needs light to navigate.
•
The robot can be used on carpets with a pile
depth of up to 20mm. however, the robot
may move more slowly on carpets than on
hard loors.
1.0.4 Electromagnetic ields (EMF)
The robot complies with all standards regarding
electromagnetic ields (EMF). If handled properly
and according to the instructions in this user
manual, the robot is safe to use based on scientiic
evidence available today.
5
Publicité
