GreenWorks GPW1800 Manuel De L'utilisateur page 7

3.1.2 INSTALL THE WHEELS
1. Put an axle through the wheel.
2. Attach a washer to the axle.
3. Put the axle through the handle frame.
4. Put a cotter pin through the hole of the axle.
3.1.3 INSTALL THE GUN HOLDER
1. Aligh the screw sleeves of the gun holder with the screw
holes on the upper handle.
2. Push the screws through the screw sleeves and tighten
them.
3.1.4 INSTALL THE UPPER HANDLE
1. Push and hold the handle lock button on the upper handle.
2. Move the upper handle into the lower handle until the
handle lock button clicks through the slot.
English
3.1.5 INSTALL THE SPRAY WAND
1. Push the end of the spray wand into the gun handle.
2. Turn the spray wand clockwise until the tabs lock into
position.
Make sure that the connection has no leakage.
3.1.6 INSTALL THE HIGH PRESSURE HOSE
1. Push and turn clockwise one end of the high pressure
hose into the inlet coupler.
2. Remove the oulet coupler cap.
3. Install and tighten the other end of the high pressure hose
onto the water outlet coupler.
4 OPERATION
Make sure that all the connections are tight and have no
leakage before operation.
4.1 CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
When you operate the self-coiling hose, make sure that the
hose has no blockage.
7
WARNING
WARNING
WARNING
EN