Maintenance And Cleaning; Associated Standards And Regulations; Technical Data - IKA MTS 2/4 digital Mode D'emploi

Maintenance and cleaning

The IKA MTS 2/4 digital is maintenace-free. It is subject only to
the natural wear and tear of components and their statistical fai-
lure rate.
When ordering spare parts, please give the manufacturing
number shown on the type plate, the machine type and the
name of the spare part.
Please send in equipment for repair only after it has been clea-
ned and is free from any materials which may constitute a health
hazard. Use only cleansing agents which have been approved by
IKA to clean IKA devices. To remove use:
Dyes
Construction materials
Cosmetics
Foodstuffs
Fuels
For materials which are not listed, please request information
from IKA. Wear the proper protective gloves during cleaning of
the devices. Electrical devices may not be placed in the cleansing
agent for the purpose of cleaning.
Before using another than the recommended method for clea-
ning or decontamination, the user must ascertain with the manu-
facturer that this method does not destroy the instrument.

Associated standards and regulations

Construction in accordance with the foolwing safety standards
IEC 61 010-1
UL 3101-1
Construction in accordance with the foolwing EMC standards
IEC 61 326-1
12
isopropyl alcohol
water containing tenside / iso
propyl alcohol
water containing tenside / iso
propyl alcohol
water containing tenside
water containing tenside
CAN/CSA C22.2 (1010-1)
Associated EU guidlines
EMC-guidlines: 89/336/EWG 93/31/EWG
Machine guidelines: 73/023/EWG

Technical data

design voltage: VAC
or VAC
design frequency: Hz
input power: W
output power: W
Speed range: rpm
Speed setting:
Speed display:
Drive:
Agitation stroke mm
Shaking motion:
Perm. duration of operation: %
Perm. ambient temperature: °C
Perm. relative humidity: %
prozection class acc. DIN 40 050:
protection class:
overvoltage category:
contamination level:
operation at a terrestrial altitude:m
max. load: kg
dimensions: (W x D x H) mm
weight: kg
230±
10%
115±
10%
50/60
19
5
0 - 1100 (infinitely
adjustable)
Turn dial on front side)
Scale 0 - 1100
Speed controlled asyn-
chronous motor
4 Ø
horizontal, circular
100
+5 to +40
80
IP 21
II
II
2
max. 2000 above sea level
2 (including attachment)
157x247x130 (without
attachment)
5,7
MTS 012002