Télécharger Imprimer la page

Ribimex Ribiland PRTH510A/1 Manuel D'instructions Et D'utilisation page 19

Taille-haies électrique

Publicité

Les langues disponibles

Les langues disponibles

Only the branches higher than the top of the wire or line should be cut (Fig.4).
- The sides of a hedge should be trimmed from bottom to top (Fig. 5).
Fig.2
Important :
- Large branches should be cut with shears.
- In case the blades get blocked, stop and unplug the hedge trimmer. Then, remove the blockage.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that switch is off and tool's plug is
disconnected from its power supply.
6.1- Maintenance
- Always wear gardening gloves when handling or working near the sharp blades.
- Check your machine regularly before starting any work. Check the machine carefully and replace
worn or damaged parts for safety.
- Keep all nuts, bolts and screws tight to be sure that the machine is in safe working condition.
- Damaged cutter blades have to be repaired or exchanged by a qualified person before working
with the machine.
- Do not attempt to repair the machine yourself, to avoid any danger.
- Only use original accessories and spare parts.
6.2- Cleaning
a) Clean the plastic parts with a soft and clean cloth and dry the housing carefully.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any
sharp objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate
the tool.
Never splash with water or clean with high pressure hose!
b) After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating
oil and spray a thin layer of protective oil on the whole blade.
c) Always keep the ventilation slots in motor housing clean. Clean ventilation holes with soft brush.
6.3- Storage
- Keep product, user manual and accessories in the original packaging.
- Clean tool before storage.
- Always lubricate the cutter blade with protective oil spray before storage.
- Store the machine with the supplied cutter blade protection cover (1).
- It is recommended to store the product in a clean, dry location, protected from humidity, frost and
dust, and keep it out of children's reach (e.g. high or in a locked up place).
Fig.3
Fig.4
Fig.5
Page 19 / 30

Publicité

loading

Ce manuel est également adapté pour:

515486