Publicité
Les langues disponibles
Les langues disponibles
8.
Pull the bottom of the stainless steel front panel
away from the door to remove the fixing brackets
from the screws. Then lift the door off the threaded
bolts.
9.
Place fixing brackets only loosely into the plates.
Ensure that you do not lose them.
10. Remove base panel from the appliance.
11. Carefully push the appliance into the installation
enclosure.
Push in the appliance until the frame is situated on
the installation enclosure walls (if not demounted
before).
Pull the string to prevent the power cord from
becoming caught.
18
12. Remove edge protection (if attached).
Publicité
