Adventys DGIC 3600 Guide D'utilisation page 15

How to uae your induction plitncht ?
DGIC 3600
Plug the unit on a standard mono phases power plug 230V.
Touche (On/Off) control panel in order to turn on a cooking zone. A « 0 » will appear on the screen on the screen. No power or
heat are activated at the stage.
Then, select the temerature touch « + » or « - » or (P1), (P2) or (P3), in order to start the heating of the cooking zone. The
screen pad will show the temperature in C° or in F°.
If you select simultaneously the Temperature toiuches (+) and (-) for at 3 seconds, you can decide to portray on the screen the
level of temperature in Celsuis (°C) between 30 and 250°C or in Fahrenheit (°F) between 86 and 482°F.
Heat setting
The screen pad always indicates the level of Temperature selected between 30 and 250°C or between 86 and 482°F.regarding
the option selected by the user.
At any time you can adjust the temperature selected by touching (+) or (-) controls.
If the temperature selected on the screen keeps blinking (frequency of 1Hz) it mens that the required temperature has not
reached. It's better to wait for the stabilization of the display to start using the plancha.
Turn the unit Off
Touch another time the (On/Off) control panel oh the front or back cooking zone in order to turn it off. The power of the coo-
king zone is cut off, and the screen are shttuing down.
15