Télécharger Imprimer la page

CF MOTO ZFORCE 800 Trail Guide Du Propriétaire page 166

Publicité

Les langues disponibles

Les langues disponibles

Drain Bolt Torque: 18�5 ft-lb� (  2 5 N·m  )
15� Use a dry and clean cloth to wipe the area around magnetic
drain bolt.
16� Add the recommended type of oil into oil dipstick hole using the
funnel, funnel extension tube and tube adapter supplied with
the vehicle. Keep oil level in the specified range.
17� Remove the funnel assy, verify the oil level is between the
upper and lower mark with the dipstick, and adjust the oil level
accordingly�
Too much or too little oil will have an impact on the normal
operation of the engine. Make sure the oil is maintained between
the upper and lower marks of the dipstick.
18� Install and tighten the oil dipstick�
19� Verify the vehicle is in parking state, then start and idle the
vehicle for 30 seconds.
20� Inspect the engine for leaks after turning off engine. Contact
your dealer if leaks are found.
Before changing the engine oil, turn off the vehicle, allow it to cool,
and keep it in parking position to avoid any injury or death�
21� Dispose the used oil and filter properly.
Maintenance
CAUTION
WARNING
166
4
3
5
6

Publicité

loading

Ce manuel est également adapté pour:

Zforce 950 trailZforce 950 sportZforce 950 sport-4