Publicité
Les langues disponibles
Les langues disponibles
•
If winching at an angle is unavoidable, follow these precautions while operating:
A.Look at the winch drum occasionally. Never let the winch cable "stack" or accumulate at one end of
the drum. Too much cable at one end of the drum can damage the winch and cable.
B.If cable stacking occurs, stop winching. Follow the 'Winch Cable Spooling Guidelines' section in this
manual to redistribute the cable evenly before continuing.
•
Always apply the vehicle's park brake and/or park mechanism to hold the vehicle in place during
winching� Use wheel chocks when necessary�
•
Always maintain at least five full turns of cable wrapped around the winch drum at all times. The friction
provided by the wrapped cable allows the drum to pull on the winch cable and move the load.
•
Never grease or oil the winch cable. This will cause the winch cable to collect debris that will shorten
the life of the cable.
•
The winch motor and relay connector may become hot during continuous use. When winching for more
than 45 seconds, or if the winch stalls during operation, stop and allow the winch components to cool for
a minimum of 10 minutes before using it again.
•
Never operate the winch without running the engine. The engine's charging system helps keep the
battery maintained. Battery reserve capacity can be quickly exhausted by heavy winch use, rendering
the starting system inoperable.
•
Always operate with concern for the environment. Do not purposely damage trees, etc.
Basic Winch Operation
Follow these operating instructions if your vehicle is equipped with a winch, or if you choose to install an
accessory winch on your vehicle� Read Winch Safety Warnings and Winch Operating Precautions on the
preceding pages before using your winch.
Safe Operation - Driving Safely
137
Publicité
