CF MOTO ZFORCE 800 Trail Guide Du Propriétaire page 103

Controls and Features
Indicators and Warnings
1� Turning Light (If equipped, available only in select countries)
When switch turns to right turning light position, the right turning indicator will be on.
When switch turns to left turning light position, the left turning indicator will be on.
2� Seat belt Warning Indicator
Seatbelt Reminder. This indicator displays when the seat belt is not fastened. When latch plate is not pushed
into the buckle, indicator on the dashboard will be on and engine RPM is restricted within 3700 for ZFORCE
950 Trail / 950 Sport / 950 Sport-4 and within 4250 for ZFORCE 800 Trail; When the latch plate is pushed
into the buckle, indicator on the dashboard will be off and vehicle speed limiting feature is disabled.
3� Neutral indicator
This indicator displays when the transmission is in neutral�
4� OPC Indicator (If equipped, available only in select countries)
When the driver leaves the seat without shifting to the parking position, this indicator will be on and alarm
sounds�
5� High Beam Indicator
This indicator illuminates when the headlight switch turns to high beam position.
6� Position Light Indicator
This indicator illuminates when the vehicle is powered on�
103